
ADAPTORS / JOINT PARTS
90° Angle Piece
- Weight
- 640 g
- Material
- Aluminum
- Colour
- RAL 7035 / Cover RAL 7016
- Package Dimensions
- 125 × 75 × 115 mm
- HS Code
- 7606.99.90.19
- Warranty
- 5 years
Technical data
Specifications for planning, selection and use at a glance.
Material & finish
- Material Composition
- Aluminum
- Colour
- RAL 7035 / Cover RAL 7016
- RAL colours
- RAL 7035 / RAL 7016
Application & function
- Operating Weight
- 640 g
- Primary Use Case
- Machine Building / Automation / HMI operator stations
- Operating Temperature
- –40°C to +70°C
- Protection Rating
- –IP65 (DIN EN 60529)
- Rated Voltage
- Mechanical (not subject to electrical certification)
- Movement
- Fixed
Safety & compliance
- Earthing
- Yes, integrated solution
- RoHS Compliance
- RoHS EU Directive 2011/65/EU
- REACH Compliance
- REACH Regulation 1907/2006/EC
- Certification
- IEC 60529; (EG) No. 765/2008; (EU) 2023/956
Further information
- Movement type
- fest
Version & enquiry
Use the item number and version to prepare your enquiry.
| Choose a version | ||
|---|---|---|
| SKU: X-M-WS01 | 640 |
SKU: X-M-WS01
- Weight (g)
- 640
Assembly instructions
About these instructions
Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.
Preparation & tools
Supplied and installation parts

Required tools
- Allen key suitable for the fasteners
- Torque wrench for the final engineering check

1. Fasten the connection
Insert the angle bolts into their slots and tighten.
- M6 × 20

2. Insert the gasket
Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

3. Connect the profile
Completely establish the first profile connection shown.

4. Fasten the connection
Tighten the profile bolts.
- M6 × 30
- J6.4
- M6 × 20
- M6

5. Align the system
M6 × 20 angle bolts are used to prevent profile sagging due to the heavy weight that can occur with long support arm profiles. If sagging does not occur in your application, leave the angle bolts in the tightened position. If there is deflection in your application, loosen the M6 × 30 profile bolts by 2-3mm depending on the desired angle. Once the profile is adjusted to the desired position, retighten the M6 × 30 angle screws. Then check the inclination with a spirit level. Insert the angle bolts into their slots and tighten.
- M6 × 20
- M6 × 30

6. Insert the gasket
Remove the yellow tape. Insert the gasket so that the adhesive surface faces inward.

7. Inspect the assembly
Check whether the assembly is as shown in the figure.

8. Connect the profile
Completely establish the second profile connection shown.

9. Prepare the components
Make sure that the assembly is carried out as shown in the illustration.

10. Align the system
Angle bolts are used to prevent the profile from sagging due to the heavy weight that can occur with long support arm profiles.
- M6
- M6 × 20

11. Insert the gasket
Remove the yellow tape. Place the gasket with the adhesive surface facing inwards.

12. Fit the cover
Place the cover on the module and tighten the screws.
- M4 × 8

13. Insert the gasket
Check whether the seal is seated well.
Select a step or use the arrows. On mobile, swipe left or right.
Products in this series
Panel Tilting Adaptor
Ø48 Adaptor
Rotatable Panel Coupling
Rotatable Panel Coupling
080/Ø48 Adaptor
Ø134 mm 10° Panel Adaptor
Wall-Socket Mounting Bracket
080 / 050 Support Arm Adaptor
Warning Lamp Cover (M22)
Vesa Panel Tilting Adaptor Moving
Panel Coupling
080 Panel Adaptor
10° Angle Piece
Rotatable Panel Adaptor Vertical
Ø134 mm Panel Adaptor
Ø130 mm Panel Tilting Adaptor - With Bellows
Warning Lamp Cover (M18)
Height Adjustable Support Arm
Rotatable Wall-Mounted Hinge Vertical Outlet
Rotatable Top Mounted 90° Angle Joint
Steel Wall Mounted Module - With Bellows
Steel Interconnection Module - With Bellows
Rotatable Wall-Mounted Hinge Horizontal Outlet
Rotatable Top Mounted Vertical Outlet
Rotatable Panel 90° Angle Coupling
Rotatable profile joint
Ø48 Pipe Profile
Rotatable Intermediate Hinge
Mobile HMI PC cabinet station
HMI base
mobile kiosk base with castors
080 Support Profile - 1000mm · X-M
