Skip to content

PANEL COUPLING

Rotatable Panel Coupling

Request a quote
The rotary panel coupling forms the articulated connection between a support arm in the X-M system and the operator enclosure. It allows the connected panel to be aligned without repositioning the support-arm connection. The coupling sits directly at the enclosure connection. It therefore complements the positioning provided by the support-arm joints with a separate rotary movement directly at the operating unit. The rotation angle is 310°.
Weight
1.05 kg
Material
Aluminum
Colour
RAL 7035
Package Dimensions
150 × 150 × 50 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Aluminum
RAL colours
RAL 7035

Application & function

Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Rotation angle
310 deg

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Operating Weight
1.05 kg
Movement type
drehbar
Diameter
134.38 mm
Thickness
39 mm

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-M-PKD02

    Weight (g)
    1050

Product documents

Product files and documentation together in one place.

3 files

ZIP 1 file
PDF 2 files
  • X-M-PKD02-Produktunterlagen-DE.pdf

    684.1 kB

  • X-M-PKD02-Produktunterlagen-EN.pdf

    681.1 kB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 6 · Insert the gasket

  1. Insert the gasket

    1. Insert the gasket

    Remove the yellow protective films. Attach one of the two gaskets to the top and bottom mating surfaces of the panel coupling; the adhesive surfaces face the clutch housing.

  2. Insert the gasket

    2. Insert the gasket

    Check the all-round, wrinkle-free fit of both seals on the top and bottom of the panel coupling.

  3. Fasten the module to the panel

    3. Fasten the module to the panel

    The screws are not included.

    Top Mount: Position the panel coupler on the top of the horizontal panel or mounting surface and secure it from below with four M6 screws. The screws are not included.

    • M6
  4. Fasten the module to the panel

    4. Fasten the module to the panel

    The screws are not included.

    Bottom mounting: Position the panel coupler at the bottom of the panel and attach it from the inside of the panel with four M6 screws. The screws are not included.

    • M6
  5. Inspect the assembly

    5. Inspect the assembly

    Regardless of the installation position chosen, check whether the panel coupling, seal and panel are in full contact with no visible gap.

  6. Prepare the mounting holes

    6. Prepare the mounting holes

    If required, prepare the mounting holes according to the dimensioned drawing. All dimensions are given in millimetres.

Select a step or use the arrows. On mobile, swipe left or right.