Skip to content

PANEL COUPLING

Vesa Panel Tilting Adaptor Moving

Request a quote
The tilting VESA adapter with bellows connects an operating device to the X-M support-arm system. Its tilt function allows the orientation of the operating face to be adjusted at the workstation. The bellows enclose the moving connection area. The device is attached using the VESA hole pattern, whose specific configuration must match the connected device. The adapter adds a tilt movement directly at the operating device.
Weight
1200 g
Material
Sheet Steel
Colour
RAL 7035 (Bellow RAL 7016)
Package Dimensions
180 × 110 × 150 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Sheet Steel
Colour
RAL 7035 (Bellow RAL 7016)
RAL colours
RAL 7035 / RAL 7016

Application & function

Operating Weight
1200 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
+30° / - 40°

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Movement type
neigbar
Positive tilt angle
30 deg
Negative tilt angle
-40°

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-M-VKA01

    Weight (g)
    1200

Product documents

Product files and documentation together in one place.

3 files

ZIP 1 file
PDF 2 files
  • X-M-VKA01-Produktunterlagen-DE.pdf

    904.3 kB

  • X-M-VKA01-Produktunterlagen-EN.pdf

    899.2 kB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 5 · Prepare the components

  1. Prepare the components

    1. Prepare the components

    Insert the adapter into the coupling as shown in the illustration on the left.

  2. Prepare the components

    2. Prepare the components

    Combine the modules step by step as shown in the figure.

  3. Fasten the connection

    3. Fasten the connection

    Tighten the connecting bolts.

    • M6 × 20
    • J6.4
    • M6
  4. Fasten the module to the panel

    4. Fasten the module to the panel

    Check the module and panel connections for proper installation.

  5. Prepare the mounting holes

    5. Prepare the mounting holes

    If required, prepare the mounting holes according to the dimensioned drawing. All dimensions are given in millimetres.

Select a step or use the arrows. On mobile, swipe left or right.