Skip to content

PANEL COUPLING

Ø134 mm 10° Panel Adaptor

Request a quote
The Ø134 mm panel adapter provides a fixed 10° connection between the connection module and operator enclosure in the X-M support-arm system. It bridges the connection dimensions while setting the inclination at the enclosure connection. The angle is defined by the adapter's design and is not adjusted through a joint. The attachment points provided are used to mount the adapter on the operator enclosure.
Weight
380 g
Material
Aluminum
Colour
RAL 7035
Package Dimensions
135 × 45 × 130 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Aluminum
Colour
RAL 7035
RAL colours
RAL 7035

Application & function

Operating Weight
380 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
Fixed

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Diameter
134 mm
Movement type
fest
Angle
10 deg

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-M-PA03

    Weight (g)
    380

Product documents

Product files and documentation together in one place.

3 files

ZIP 1 file
PDF 2 files
  • X-M-PA03-Produktunterlagen-DE.pdf

    723.8 kB

  • X-M-PA03-Produktunterlagen-EN.pdf

    719.5 kB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 6 · Prepare the components

  1. Prepare the components

    1. Prepare the components

    Combine the modules step by step as shown in the figure. X-M-PKD01 X-M-PKD02 X-L-PKD01 X-L-PWK01

  2. Prepare the components

    2. Prepare the components

    Insert the adapter into the coupling as shown in the illustration on the left.

  3. Fasten the connection

    3. Fasten the connection

    Tighten the connecting bolts.

    • M6 × 30
    • J6.4
    • M6
  4. Insert the gasket

    4. Insert the gasket

    Remove the yellow tape. Insert the gasket so that the adhesive surface faces inward.

  5. Fasten the module to the panel

    5. Fasten the module to the panel

    Place the module on the panel.

    • M6 × 30
  6. Prepare the mounting holes

    6. Prepare the mounting holes

    If required, prepare the mounting holes according to the dimensioned drawing. All dimensions are given in millimetres.

Select a step or use the arrows. On mobile, swipe left or right.