Skip to content

PANEL COUPLING

Panel Coupling

Request a quote
The fixed panel coupling connects a support arm in the X-M system to the operator enclosure. It forms a rigid connection without adding another rotary movement at this point in the assembly. The coupling is fitted directly between the support arm and enclosure. Its function is to provide a fixed enclosure attachment, while the other designated joints in the support-arm assembly position the operator enclosure. The coupling has a diameter of 134 mm.
Weight
440 g
Material
Aluminum
Colour
RAL 7035
Package Dimensions
135 × 40 × 135 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Aluminum
Colour
RAL 7035
RAL colours
RAL 7035

Application & function

Operating Weight
440 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
Fixed

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Diameter
134 mm
Movement type
fest

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-M-PKF01

    Weight (g)
    440

Product documents

Product files and documentation together in one place.

3 files

ZIP 1 file
PDF 2 files
  • X-M-PKF01-Produktunterlagen-DE.pdf

    889.7 kB

  • X-M-PKF01-Produktunterlagen-EN.pdf

    886 kB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 6 · Insert the gasket

  1. Insert the gasket

    1. Insert the gasket

    Remove the yellow tape. Insert the gasket so that the adhesive surface faces inward.

  2. Connect the profile

    2. Connect the profile

    Insert the profile into the coupling as shown in the figure on the left.

  3. Fasten the connection

    3. Fasten the connection

    Install the M6 ​​× 30 profile bolts.

    • M6 × 30
    • J6.4
  4. Fasten the module to the panel

    4. Fasten the module to the panel

    The mounting screws are not included.

    Attach the module to the panel with four M6 × 30 screws. The mounting screws are not included.

    • M6 × 30
  5. Fasten the module to the panel

    5. Fasten the module to the panel

    Check that the assembly was carried out as shown in the illustration and that the panel is seated correctly.

  6. Prepare the mounting holes

    6. Prepare the mounting holes

    If required, prepare the mounting holes according to the dimensioned drawing. All dimensions are given in millimetres.

Select a step or use the arrows. On mobile, swipe left or right.