Skip to content

PANEL COUPLING

080 Panel Adaptor

Request a quote
The fixed panel adapter connects the operator enclosure to the X-M support-arm system. It forms a rigid transition at the enclosure connection without adding a rotary or tilt function at this point. The component joins the respective connection surfaces. With this version, movement of the operator enclosure is provided by the designated joints elsewhere in the support-arm assembly, while the adapter forms the fixed enclosure connection.
Weight
235 g
Material
Aluminum
Colour
RAL 7035
Package Dimensions
170 × 40 × 80 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Aluminum
Colour
RAL 7035
RAL colours
RAL 7035

Application & function

Operating Weight
235 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
Fixed

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Movement type
fest

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-M-PA01

    Weight (g)
    235

Product documents

Product files and documentation together in one place.

3 files

ZIP 1 file
PDF 2 files
  • X-M-PA01-Produktunterlagen-DE.pdf

    1.2 MB

  • X-M-PA01-Produktunterlagen-EN.pdf

    1.2 MB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 5 · Prepare the components

  1. Prepare the components

    1. Prepare the components

    Combine the modules step by step as shown in the figure

    • M6 × 30
    • J6.4
  2. Prepare the components

    2. Prepare the components

    Assemble the module as shown in the figure on the left.

  3. Fasten the module to the panel

    3. Fasten the module to the panel

    Place the module on the panel.

    • J6.4
    • M6
    • M6 × 30
  4. Fasten the connection

    4. Fasten the connection

    The screws are not included.

    Insert the connecting bolts. The screws are not included.

  5. Prepare the mounting holes

    5. Prepare the mounting holes

    If required, prepare the mounting holes according to the dimensioned drawing. All dimensions are given in millimetres.

Select a step or use the arrows. On mobile, swipe left or right.