
PANEL COUPLING
Rotatable Panel Coupling
- Weight
- 1240 g
- Material
- Aluminum
- Colour
- RAL 7035
- Package Dimensions
- 150 × 65 × 140 mm
- HS Code
- 7606.99.90.19
- Warranty
- 5 years
Technical data
Specifications for planning, selection and use at a glance.
Material & finish
- Material Composition
- Aluminum
- Colour
- RAL 7035
- RAL colours
- RAL 7035
Application & function
- Operating Weight
- 1240 g
- Primary Use Case
- Machine Building / Automation / HMI operator stations
- Operating Temperature
- –40°C to +70°C
- Protection Rating
- –IP65 (DIN EN 60529)
- Rated Voltage
- Mechanical (not subject to electrical certification)
- Movement
- Rotatable 315°
- Rotation angle
- 315 deg
Safety & compliance
- Earthing
- Yes, integrated solution
- RoHS Compliance
- RoHS EU Directive 2011/65/EU
- REACH Compliance
- REACH Regulation 1907/2006/EC
- Certification
- IEC 60529; (EG) No. 765/2008; (EU) 2023/956
Further information
- Diameter
- 133 mm
Version & enquiry
Use the item number and version to prepare your enquiry.
| Choose a version | ||
|---|---|---|
| SKU: X-M-PKD01 | 1240 |
SKU: X-M-PKD01
- Weight (g)
- 1240
Assembly instructions
About these instructions
Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.
Preparation & tools
Supplied and installation parts

Required tools
- Allen key suitable for the fasteners
- Torque wrench for the final engineering check

1. Insert the gasket
Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

2. Connect the profile
Insert the profile into the coupling as shown in the figure on the left.

3. Fasten the connection
Rotate the inner moving part to the first mounting position shown.

4. Fasten the connection
Tighten the two M6 × 30 profile bolts of the first mounting position evenly.
- M6 × 30

5. Fasten the connection
Rotate the inner movable part to the second mounting position shown.

6. Fasten the connection
Tighten the two M6 × 30 profile bolts of the second mounting position evenly.
- M6 × 30

7. Prepare the components
Insert the plastic plugs into the slots.

8. Set the rotation range
Install the M8 × 25 set screw.
- M8 × 25

9. Set the rotation range
Attention: You can limit the clockwise and counterclockwise rotation of the module with M8 × 25 screws.
Attention: You can limit the clockwise and counterclockwise rotation of the module with M8 × 25 screws. There are 4 holes on the module. Optionally you can limit the rotation with 1 screw.
- M8 × 25

10. Insert the gasket
Remove the yellow tape. Insert the seal to the mounting surface with the adhesive surface to the component into the seal holder shown without folds.

11. Align the system
Insert the switching lever into the slot. The switching lever is used to adjust the torsional rigidity of the module.
- M6 × 25

12. Fasten the module to the panel
M6 × 30 (4×) screws are not included.
Place the module on the panel. M6 × 30 (4×) screws are not included.
- M6 × 30
- J6.4

13. Fasten the module to the panel
Check the module and panel connections for proper installation.

14. Prepare the mounting holes
If required, prepare the mounting holes according to the dimensioned drawing. All dimensions are given in millimetres.
Select a step or use the arrows. On mobile, swipe left or right.
Products in this series
Panel Tilting Adaptor
Ø48 Adaptor
Rotatable Panel Coupling
080/Ø48 Adaptor
Ø134 mm 10° Panel Adaptor
Wall-Socket Mounting Bracket
080 / 050 Support Arm Adaptor
Warning Lamp Cover (M22)
Vesa Panel Tilting Adaptor Moving
Panel Coupling
080 Panel Adaptor
10° Angle Piece
Rotatable Panel Adaptor Vertical
Ø134 mm Panel Adaptor
Ø130 mm Panel Tilting Adaptor - With Bellows
Warning Lamp Cover (M18)
Height Adjustable Support Arm
Rotatable Wall-Mounted Hinge Vertical Outlet
Rotatable Top Mounted 90° Angle Joint
90° Angle Piece
Steel Wall Mounted Module - With Bellows
Steel Interconnection Module - With Bellows
Rotatable Wall-Mounted Hinge Horizontal Outlet
Rotatable Top Mounted Vertical Outlet
Rotatable Panel 90° Angle Coupling
Rotatable profile joint
Ø48 Pipe Profile
Rotatable Intermediate Hinge
Mobile HMI PC cabinet station
HMI base
mobile kiosk base with castors
080 Support Profile - 1000mm · X-M
