
Front right · From above
ADAPTORS / JOINT PARTS
Warning Lamp Cover (M22)
Request a quote
The signal light cover adds a mounting point for a light with a M22 connection to the X-M support-arm system. Fitted in the corner module area, it provides the mechanical transition to the signal light. The connection is designed for the specified thread. The cover allows a light with this connection to be incorporated into the support-arm assembly; the light's electrical configuration must be considered separately.
- Weight
- 130 g
- Material
- Aluminum
- Colour
- RAL 7016
- Package Dimensions
- 145 × 50 × 70 mm
- HS Code
- 7606.99.90.19
- Warranty
- 5 years
Technical data
Specifications for planning, selection and use at a glance.
Material & finish
- Material Composition
- Aluminum
- Colour
- RAL 7016
- RAL colours
- RAL 7016
Application & function
- Operating Weight
- 130 g
- Primary Use Case
- Machine Building / Automation / HMI operator stations
- Operating Temperature
- –40°C to +70°C
- Protection Rating
- –IP65 (DIN EN 60529)
- Rated Voltage
- Mechanical (not subject to electrical certification)
- Movement
- Fixed
Safety & compliance
- Earthing
- Yes, integrated solution
- RoHS Compliance
- RoHS EU Directive 2011/65/EU
- REACH Compliance
- REACH Regulation 1907/2006/EC
- Certification
- IEC 60529; (EG) No. 765/2008; (EU) 2023/956
Further information
- Movement type
- fest
- Connection thread
- M22×1.5
Version & enquiry
Use the item number and version to prepare your enquiry.
| Choose a version | ||
|---|---|---|
| SKU: X-M-SLA01 | 130 |
SKU: X-M-SLA01
- Weight (g)
- 130
Assembly instructions
About these instructions
Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.
Preparation & tools
Supplied and installation parts

Required tools
- Allen key suitable for the fasteners
- Torque wrench for the final engineering check

1. Install the warning lamp
Remove the yellow tape and insert the gasket with the adhesive surface facing inward. The warning light connection is standard M22 × 1.5; Different connection sizes are possible on request.
- M22 × 1,5

2. Fit the cover
Position the covers and secure them with the screws shown.

3. Install the warning lamp
Install the warning light by screwing it clockwise into the cover.

4. Inspect the assembly
Check whether the assembly is as shown in the figure.
Select a step or use the arrows. On mobile, swipe left or right.
Products in this series
Panel Tilting Adaptor
Ø48 Adaptor
Rotatable Panel Coupling
Rotatable Panel Coupling
080/Ø48 Adaptor
Ø134 mm 10° Panel Adaptor
Wall-Socket Mounting Bracket
080 / 050 Support Arm Adaptor
Vesa Panel Tilting Adaptor Moving
Panel Coupling
080 Panel Adaptor
10° Angle Piece
Rotatable Panel Adaptor Vertical
Ø134 mm Panel Adaptor
Ø130 mm Panel Tilting Adaptor - With Bellows
Warning Lamp Cover (M18)
Height Adjustable Support Arm
Rotatable Wall-Mounted Hinge Vertical Outlet
Rotatable Top Mounted 90° Angle Joint
90° Angle Piece
Steel Wall Mounted Module - With Bellows
Steel Interconnection Module - With Bellows
Rotatable Wall-Mounted Hinge Horizontal Outlet
Rotatable Top Mounted Vertical Outlet
Rotatable Panel 90° Angle Coupling
Rotatable profile joint
Ø48 Pipe Profile
Rotatable Intermediate Hinge
Mobile HMI PC cabinet station
HMI base
mobile kiosk base with castors
080 Support Profile - 1000mm · X-M
