Skip to content

PANEL COUPLING

Panel Tilting Adaptor

Request a quote
The tilting panel adapter with bellows connects the operator enclosure to the X-M support-arm system. It adds adjustable enclosure inclination to the connection, allowing the orientation of the operating face to be matched to the working position. The bellows enclose the moving connection area. Positioned directly at the enclosure, the adapter provides the tilt movement, complementing the movement available elsewhere in the support-arm assembly.
Weight
750 g
Material
Sheet Steel
Colour
RAL 7035 (Bellow RAL 7016)
Package Dimensions
195 × 90 × 95 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Sheet Steel
Colour
RAL 7035 (Bellow RAL 7016)
RAL colours
RAL 7035 / RAL 7016

Application & function

Operating Weight
750 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
+30° / - 40°

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Movement type
neigbar
Positive tilt angle
30 deg
Negative tilt angle
-40°

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-M-PKA01

    Weight (g)
    750

Product documents

Product files and documentation together in one place.

3 files

ZIP 1 file
PDF 2 files
  • X-M-PKA01-Produktunterlagen-DE.pdf

    1.6 MB

  • X-M-PKA01-Produktunterlagen-EN.pdf

    1.6 MB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 6 · Align the system

  1. Align the system

    1. Align the system

    Insert the switching lever into the slot. The switching lever is used to adjust the torsional rigidity of the module.

    • M8 × 20
  2. Fasten the connection

    2. Fasten the connection

    Place a compatible module as shown and screw the connection using the specified fasteners.

  3. Prepare the components

    3. Prepare the components

    Insert the adapter into the coupling as shown in the illustration on the left.

  4. Fasten the module to the panel

    4. Fasten the module to the panel

    Screws and nuts are not included.

    Tighten the connecting bolts. Screws and nuts are not included. Place the module on the panel.

    • M6
  5. Fasten the module to the panel

    5. Fasten the module to the panel

    Check the module and panel connections for proper installation.

  6. Prepare the mounting holes

    6. Prepare the mounting holes

    If required, prepare the mounting holes according to the dimensioned drawing. All dimensions are given in millimetres.

Select a step or use the arrows. On mobile, swipe left or right.