
JOINT PARTS
Wall-Socket Mounting Bracket
- Weight
- 320 g
- Material
- Aluminum
- Colour
- RAL 7035 / Cover RAL 7016
- Package Dimensions
- 165 × 75 × 35 mm
- HS Code
- 7606.99.90.19
- Warranty
- 5 years
Technical data
Specifications for planning, selection and use at a glance.
Material & finish
- Material Composition
- Aluminum
- Colour
- RAL 7035 / Cover RAL 7016
- RAL colours
- RAL 7035 / RAL 7016
Application & function
- Operating Weight
- 320 g
- Primary Use Case
- Machine Building / Automation / HMI operator stations
- Operating Temperature
- –40°C to +70°C
- Protection Rating
- –IP65 (DIN EN 60529)
- Rated Voltage
- Mechanical (not subject to electrical certification)
- Movement
- Fixed
Safety & compliance
- Earthing
- Yes, integrated solution
- RoHS Compliance
- RoHS EU Directive 2011/65/EU
- REACH Compliance
- REACH Regulation 1907/2006/EC
- Certification
- IEC 60529; (EG) No. 765/2008; (EU) 2023/956
Further information
- Movement type
- fest
Version & enquiry
Use the item number and version to prepare your enquiry.
| Choose a version | ||
|---|---|---|
| SKU: X-M-WBF01 | 320 |
SKU: X-M-WBF01
- Weight (g)
- 320
Product documents
Product files and documentation together in one place.
Data sheets with the new article numbers are not yet available. Please request the documents you need.
Files: 7 of 7
ZIP 1 file
- Download
X-M-WBF01-CAD.zip
1.6 MB
PDF 6 files
- Download
X-M-WBF01-Product-documents-de-DE.pdf
2.7 MB
- Download
X-M-WBF01-Connection-dimensions-de-DE.pdf
1.2 MB
- Download
X-M-WBF01-Product-documents-en-GB.pdf
2.7 MB
- Download
X-M-WBF01-Connection-dimensions-en-GB.pdf
1.2 MB
- Download
X-M-WBF01-Connection-card-de-DE.pdf
1.1 MB
- Download
X-M-WBF01-Connection-card-en-GB.pdf
1.1 MB
Assembly instructions
About these instructions
Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.
Preparation & tools
Supplied and installation parts

Required tools
- Allen key suitable for the fasteners
- Torque wrench for the final engineering check

1. Fasten the connection
Insert the angle bolts into their slots and tighten.
- M6 × 20

2. Insert the gasket
Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

3. Connect the profile
Insert the profile into the coupling as shown in the figure on the left.
- M6 × 20

4. Fasten the connection
Tighten the profile bolts.
- J6.4
- M6 × 30

5. Align the system
Source conflict: the assembly source first identifies M6 × 20 as angle bolts, but refers to M6 × 30 when retightening them. Confirm the bolt assignment and adjustment procedure with the manufacturer before proceeding.
Angle bolts are used to prevent the profile from sagging due to the heavy weight that can occur with long support arm profiles. Use M6×20 screws for angle correction. If sagging does not occur in your application, leave the angle bolts in the tightened position. If there is deflection in your application, loosen the M6 × 30 profile bolts by 2-3mm depending on the desired angle. Once the profile is adjusted to the desired position, retighten the M6 × 30 angle screws. Then check the inclination with a spirit level.
- M6
- M6 × 20
- M6 × 30

6. Connect the grounding
Caution: Make the ground connection and check that it is secure.
Caution: Make the ground connection and check that it is secure.
- M4 × 8

7. Insert the gasket
Remove the yellow tape. Insert the seal to the mounting surface with the adhesive surface to the component into the seal holder shown without folds.

8. Insert the gasket
Check the seals for tightness.

9. Fasten the connection
M6 screws are not included in the packaging. Source conflict: the German source text specifies M6 mounting bolts, while the English text specifies M8. Confirm the correct mounting fasteners and supplied parts with the manufacturer before assembly.
M6 screws are not included in the packaging.
- M6
- M8

10. Fit the cover
Don't forget to install the module's plastic covers.
Don't forget to install the module's plastic covers.

11. Prepare the mounting holes
Prepare the mounting holes using this article's drawing: 35 × 115 mm hole centre spacing. Mounting template Ø 9 / M8; opening dimension from drawing 40 × 60.5 mm. This does not confirm free passage of a rigid connector through the complete coupling. All dimensions in millimetres.
Select a step or use the arrows. On mobile, swipe left or right.
Products in this series
Panel Tilting Adaptor
Ø48 Adaptor
Rotatable Panel Coupling
Rotatable Panel Coupling
080/Ø48 Adaptor
Ø134 mm 10° Panel Adaptor
080 / 050 Support Arm Adaptor
Warning Lamp Cover (M22)
Vesa Panel Tilting Adaptor Moving
Panel Coupling
080 Panel Adaptor
10° Angle Piece
Rotatable Panel Adaptor Vertical
Ø134 mm Panel Adaptor
Ø130 mm Panel Tilting Adaptor - With Bellows
Warning Lamp Cover (M18)
Height Adjustable Support Arm
Rotatable Wall-Mounted Hinge Vertical Outlet
Rotatable Top Mounted 90° Angle Joint
90° Angle Piece
Steel Wall Mounted Module - With Bellows
Steel Interconnection Module - With Bellows
Rotatable Wall-Mounted Hinge Horizontal Outlet
Rotatable Top Mounted Vertical Outlet
Rotatable Panel 90° Angle Coupling
Rotatable profile joint
Ø48 Pipe Profile
Rotatable Intermediate Hinge
Mobile HMI PC cabinet station
HMI base
mobile kiosk base with castors
080 Support Profile - 1000mm · X-M
