
JOINT PARTS
Rotatable Wall-Mounted Hinge Vertical Outlet
- Weight
- 5750 g
- Material
- Aluminum
- Colour
- RAL 7035 (Cover RAL 7016)
- Package Dimensions
- 280 × 200 × 210 mm
- HS Code
- 7606.99.90.19
- Warranty
- 5 years
Technical data
Specifications for planning, selection and use at a glance.
Material & finish
- Material Composition
- Aluminum
- Colour
- RAL 7035 (Cover RAL 7016)
- RAL colours
- RAL 7035 / RAL 7016
Application & function
- Operating Weight
- 5750 g
- Primary Use Case
- Machine Building / Automation / HMI operator stations
- Operating Temperature
- –40°C to +70°C
- Protection Rating
- –IP65 (DIN EN 60529)
- Rated Voltage
- Mechanical (not subject to electrical certification)
- Movement
- Rotatable 315°
- Rotation angle
- 315 deg
Safety & compliance
- Earthing
- Yes, integrated solution
- RoHS Compliance
- RoHS EU Directive 2011/65/EU
- REACH Compliance
- REACH Regulation 1907/2006/EC
- Certification
- IEC 60529; (EG) No. 765/2008; (EU) 2023/956
Version & enquiry
Use the item number and version to prepare your enquiry.
| Choose a version | ||
|---|---|---|
| SKU: X-L-WGV01 | 5750 |
SKU: X-L-WGV01
- Weight (g)
- 5750
Assembly instructions
About these instructions
Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.
Preparation & tools
Supplied and installation parts

Required tools
- Allen key suitable for the fasteners
- Torque wrench for the final engineering check

1. Insert the gasket
Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

2. Connect the profile
Insert the profile into the coupling as shown in the figure on the left.

3. Fasten the connection
Tighten the profile bolts.
- M8 × 40
- J8.4

4. Connect the grounding
Insert the grounding ball, compression spring and plastic plug into the slots provided.

5. Set the rotation range
Note: The plastic plug and set screw should be in the same hole.

6. Fasten the connection
Connect the profile coupling housing and the pivot bearing unit and fasten the connection evenly with eight M8 × 25 screws with threadlocker.
- M8 × 25

7. Inspect the assembly
Check whether the assembly is as shown in the figure.
- M8 × 25

8. Prepare the components
Combine the assembled top with the bottom.
- M8 × 25

9. Set the rotation range
Attention: You can limit the clockwise and counterclockwise rotation of the module with M8 × 10 screws.
Attention: You can limit the clockwise and counterclockwise rotation of the module with M8 × 10 screws. There are eight equally spaced holes on the module. Optionally you can set the rotation limits with two screws.
- M8 × 10

10. Connect the grounding
Caution: Make the ground connection and check that it is secure.
Caution: Make the ground connection and check that it is secure.
- M6 × 10

11. Insert the gasket
Remove the yellow tape. Insert the cover seal with the adhesive surface to the black cover into its contour without folds.

12. Insert the gasket
Remove the yellow tape. Insert the seal to the mounting surface with the adhesive surface to the component into the seal holder shown without folds.

13. Fit the cover
The M8 mounting screws are not included.
Place the black screw caps on the heads of the M8 screws. The M8 mounting screws are not included.
- M8

14. Prepare the mounting holes
If required, prepare the mounting holes according to the dimensioned drawing. All dimensions are given in millimetres.
Select a step or use the arrows. On mobile, swipe left or right.
Products in this series
Warning Lamp Cover (M22)
Rotatable Panel Coupling
Panel Coupling
Warning Lamp Cover (M18)
130/080 Support Arm Adaptor
Wall-Socket Mounting Bracket
Height Adjustable Support Arm
Steel Wall Mounted Module - With Bellows
Rotatable Intermediate Hinge
Rotatable Wall-Mounted Hinge Horizontal Outlet
Rotatable Top Mounted Vertical Outlet
90° Angle Piece
Rotatable Panel 90° Angle Coupling
Rotatable Top Mounted 90° Angle Joint
Rotatable profile joint
Steel Interconnection Module - With Bellows
kiosk base with levelling feet
kiosk base with flange
mobile kiosk base with castors
130 Support Profile - 1000mm · X-L
