Skip to content

ADAPTORS / JOINT PARTS

130/080 Support Arm Adaptor

Request a quote
The fixed reducing adapter connects support-arm profiles in the X-L system to profiles in the X-M system. It forms the transition between the two profile series and is designed as a rigid connecting component. The adapter brings the different profile connections together in one assembly. The permissible load of the specific combination must be checked separately; the transition does not provide an additional joint or rotary function.
Weight
500 g
Material
Aluminum
Colour
RAL 7035
Package Dimensions
140 × 70 × 90 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Aluminum
Colour
RAL 7035
RAL colours
RAL 7035

Application & function

Operating Weight
500 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
Fixed

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Movement type
fest

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-L-RA01

    Weight (g)
    500

Product documents

Product files and documentation together in one place.

3 files

ZIP 1 file
PDF 2 files
  • X-L-RA01-Produktunterlagen-DE.pdf

    1.4 MB

  • X-L-RA01-Produktunterlagen-EN.pdf

    1.4 MB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 5 · Insert the gasket

  1. Insert the gasket

    1. Insert the gasket

    Remove the yellow tape. Insert the gasket so that the adhesive surface faces inward.

  2. Connect the profile

    2. Connect the profile

    Insert the profile into the coupling as shown in the figure on the left.

  3. Fasten the connection

    3. Fasten the connection

    Tighten the profile bolts.

    • J8.4
    • M8 × 40
  4. Inspect the assembly

    4. Inspect the assembly

    Check whether the assembly is as shown in the figure.

  5. Align the system

    5. Align the system

    M8 × 20 angle bolts prevent weight-related sagging in long support arm profiles. If no sagging occurs, the angle bolts remain in the tightened position. If there is deflection, loosen the M8 × 40 profile bolts by 2-3 mm depending on the required angle, align the profile and then tighten it again. Check the inclination with a spirit level. Example of a montage.

    • M8 × 20
    • M8 × 40

Select a step or use the arrows. On mobile, swipe left or right.