
Front right · From above
ADAPTORS / JOINT PARTS
Warning Lamp Cover (M18)
Request a quote
The signal light cover adds a mounting point for a light with a M18 connection to the X-L support-arm system. Fitted in the corner module area, it provides the mechanical transition to the signal light. The connection is designed for the specified thread. The cover allows a light with this connection to be incorporated into the support-arm assembly; the light's electrical configuration must be considered separately.
- Weight
- 290 g
- Material
- Aluminum
- Colour
- RAL 7016
- Package Dimensions
- 200 × 55 × 100 mm
- HS Code
- 7606.99.90.19
- Warranty
- 5 years
Technical data
Specifications for planning, selection and use at a glance.
Material & finish
- Material Composition
- Aluminum
- Colour
- RAL 7016
- RAL colours
- RAL 7016
Application & function
- Operating Weight
- 290 g
- Primary Use Case
- Machine Building / Automation / HMI operator stations
- Operating Temperature
- –40°C to +70°C
- Protection Rating
- –IP65 (DIN EN 60529)
- Rated Voltage
- Mechanical (not subject to electrical certification)
- Movement
- Fixed M18
Safety & compliance
- Earthing
- Yes, integrated solution
- RoHS Compliance
- RoHS EU Directive 2011/65/EU
- REACH Compliance
- REACH Regulation 1907/2006/EC
- Certification
- IEC 60529; (EG) No. 765/2008; (EU) 2023/956
Further information
- Movement type
- fest
- Connection thread
- M18×1.5
Version & enquiry
Use the item number and version to prepare your enquiry.
| Choose a version | ||
|---|---|---|
| SKU: X-L-SLA02 | 290 |
SKU: X-L-SLA02
- Weight (g)
- 290
Assembly instructions
About these instructions
Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.
Preparation & tools
Supplied and installation parts

Required tools
- Allen key suitable for the fasteners
- Torque wrench for the final engineering check

1. Install the warning lamp
Remove the yellow tape and insert the gasket with the adhesive surface facing inward. The warning light connection is M18 × 1.5 as standard; Different connection sizes are possible on request.
- M18 × 1,5

2. Fit the cover
Position the covers and secure them with the screws shown.

3. Install the warning lamp
Install the warning light by screwing it clockwise into the cover.

4. Inspect the assembly
Check whether the assembly is as shown in the figure.
Select a step or use the arrows. On mobile, swipe left or right.
Products in this series
Warning Lamp Cover (M22)
Rotatable Panel Coupling
Panel Coupling
130/080 Support Arm Adaptor
Wall-Socket Mounting Bracket
Height Adjustable Support Arm
Steel Wall Mounted Module - With Bellows
Rotatable Intermediate Hinge
Rotatable Wall-Mounted Hinge Horizontal Outlet
Rotatable Top Mounted Vertical Outlet
90° Angle Piece
Rotatable Panel 90° Angle Coupling
Rotatable Top Mounted 90° Angle Joint
Rotatable profile joint
Steel Interconnection Module - With Bellows
Rotatable Wall-Mounted Hinge Vertical Outlet
kiosk base with levelling feet
kiosk base with flange
mobile kiosk base with castors
130 Support Profile - 1000mm · X-L
