Skip to content

JOINT PARTS

90° Angle Piece

Request a quote
The fixed 90° elbow connects a horizontal support-arm profile to a vertical profile in the X-S system. It changes the direction of the profile arrangement and forms a rigid connection point, without introducing an additional rotary axis. The elbow is used where the support-arm assembly requires a fixed change of direction and movement is to be provided by other joints in the system.
Weight
365 g
Material
Aluminum
Colour
RAL 7035 / Cover RAL 7016
Package Dimensions
110 × 65 × 95 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Aluminum
Colour
RAL 7035 / Cover RAL 7016
RAL colours
RAL 7035 / RAL 7016

Application & function

Operating Weight
365 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
Fixed

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Movement type
fest

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-S-WS01

    Weight (g)
    365

Product documents

Product files and documentation together in one place.

3 files

ZIP 1 file
PDF 2 files
  • X-S-WS01-Produktunterlagen-DE.pdf

    1.1 MB

  • X-S-WS01-Produktunterlagen-EN.pdf

    1.1 MB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 8 · Insert the gasket

  1. Insert the gasket

    1. Insert the gasket

    Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

  2. Connect the profile

    2. Connect the profile

    Insert the profile into the coupling as shown in the figure on the left.

  3. Connect the profile

    3. Connect the profile

    Completely establish the first profile connection shown.

  4. Insert the gasket

    4. Insert the gasket

    Remove the yellow tape. Insert the seal of the lower connection with the adhesive surface to the component without folds.

  5. Connect the profile

    5. Connect the profile

    Completely establish the second profile connection shown.

  6. Insert the gasket

    6. Insert the gasket

    Remove the tape. Insert the gasket so that the adhesive surface faces inward.

  7. Fit the cover

    7. Fit the cover

    Place the cover on the module and tighten the screws.

    • M4 × 8
  8. Insert the gasket

    8. Insert the gasket

    Check whether the seal is seated well.

Select a step or use the arrows. On mobile, swipe left or right.