Skip to content

JOINT PARTS

Rotatable Top Mounted 90° Angle Joint

Request a quote
The rotary top-mounted joint connects the support arm in the X-S system to a top mounting point. Its 90° form directs the connected profile horizontally away from the attachment point. The rotary connection allows the arm to pivot and the connected operator enclosure to be aligned. The joint forms the transition between the fixed mounting surface and the articulated arm assembly with a horizontal profile outlet.
Weight
1700 g
Material
Aluminum
Colour
RAL 7035 / Cover RAL 7016
Package Dimensions
140 × 145 × 130 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Aluminum
Colour
RAL 7035 / Cover RAL 7016
RAL colours
RAL 7035 / RAL 7016

Application & function

Operating Weight
1700 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
Rotatable 315°
Rotation angle
315 deg

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-S-AGH01

    Weight (g)
    1700

Product documents

Product files and documentation together in one place.

Data sheets with the new article numbers are not yet available. Please request the documents you need.

Files: 7 of 7

Search filenames
ZIP 1 file
PDF 6 files
  • X-S-AGH01-Product-documents-de-DE.pdf

    2.9 MB

  • X-S-AGH01-Connection-dimensions-de-DE.pdf

    1.3 MB

  • X-S-AGH01-Product-documents-en-GB.pdf

    2.9 MB

  • X-S-AGH01-Connection-dimensions-en-GB.pdf

    1.3 MB

  • X-S-AGH01-Connection-card-de-DE.pdf

    1.1 MB

  • X-S-AGH01-Connection-card-en-GB.pdf

    1.1 MB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 10 · Insert the gasket

  1. Insert the gasket

    1. Insert the gasket

    Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

  2. Connect the profile

    2. Connect the profile

    Insert the profile into the coupling as shown in the figure on the left.

  3. Fasten the connection

    3. Fasten the connection

    Tighten the profile bolts.

    • J6.4
    • M6
    • M6 × 30
  4. Install the cable guide

    4. Install the cable guide

    Place the plastic cable protector as shown in the illustration on the left.

  5. Set the rotation range

    5. Set the rotation range

    Attention: You can limit the clockwise and counterclockwise rotation of the module with M6 × 10 screws.

    Attention: You can limit the clockwise and counterclockwise rotation of the module with M6 × 10 screws. There are eight equally spaced holes on the module. Optionally you can set the rotation limits with two screws.

    • M6 × 10
  6. Insert the gasket

    6. Insert the gasket

    Remove the yellow tape. Insert the cover seal with the adhesive surface to the black cover into its contour without folds.

  7. Connect the grounding

    7. Connect the grounding

    Caution: Make the ground connection and check that it is secure.

    Caution: Make the ground connection and check that it is secure.

    • M4 × 8
  8. Insert the gasket

    8. Insert the gasket

    Remove the yellow tape. Insert the seal to the mounting surface with the adhesive surface to the component into the seal holder shown without folds.

  9. Fit the cover

    9. Fit the cover

    The M8 mounting screws are not included.

    Place the black screw caps on the heads of the M8 screws. The M8 mounting screws are not included.

    • M8
    • M8 × 4
  10. Prepare the mounting holes

    10. Prepare the mounting holes

    Prepare the mounting holes using this article's drawing: 90 × 90 mm hole centre spacing. Mounting template Ø 8.5 / M8; opening dimension from drawing Ø 40 mm. This does not confirm free passage of a rigid connector through the complete coupling. All dimensions in millimetres.

Select a step or use the arrows. On mobile, swipe left or right.