
JOINT PARTS
Rotatable Wall-Mounted Hinge Vertical Outlet
- Weight
- 1770 g
- Material
- Aluminum
- Colour
- RAL 7035 / Cover RAL 7016
- Package Dimensions
- 180 × 130 × 125 mm
- HS Code
- 7606.99.90.19
- Warranty
- 5 years
Technical data
Specifications for planning, selection and use at a glance.
Material & finish
- Material Composition
- Aluminum
- Colour
- RAL 7035 / Cover RAL 7016
- RAL colours
- RAL 7035 / RAL 7016
Application & function
- Operating Weight
- 1770 g
- Primary Use Case
- Machine Building / Automation / HMI operator stations
- Operating Temperature
- –40°C to +70°C
- Protection Rating
- –IP65 (DIN EN 60529)
- Rated Voltage
- Mechanical (not subject to electrical certification)
- Movement
- Rotatable 315°
- Rotation angle
- 315 deg
Safety & compliance
- Earthing
- Yes, integrated solution
- RoHS Compliance
- RoHS EU Directive 2011/65/EU
- REACH Compliance
- REACH Regulation 1907/2006/EC
- Certification
- IEC 60529; (EG) No. 765/2008; (EU) 2023/956
Version & enquiry
Use the item number and version to prepare your enquiry.
| Choose a version | ||
|---|---|---|
| SKU: X-S-WGV01 | 1770 |
SKU: X-S-WGV01
- Weight (g)
- 1770
Product documents
Product files and documentation together in one place.
Data sheets with the new article numbers are not yet available. Please request the documents you need.
Files: 7 of 7
ZIP 1 file
- Download
X-S-WGV01-CAD.zip
1.5 MB
PDF 6 files
- Download
X-S-WGV01-Product-documents-de-DE.pdf
3.6 MB
- Download
X-S-WGV01-Connection-dimensions-de-DE.pdf
1.3 MB
- Download
X-S-WGV01-Product-documents-en-GB.pdf
3.6 MB
- Download
X-S-WGV01-Connection-dimensions-en-GB.pdf
1.3 MB
- Download
X-S-WGV01-Connection-card-de-DE.pdf
1.1 MB
- Download
X-S-WGV01-Connection-card-en-GB.pdf
1.1 MB
Assembly instructions
About these instructions
Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.
Preparation & tools
Supplied and installation parts

Required tools
- Allen key suitable for the fasteners
- Torque wrench for the final engineering check

1. Insert the gasket
Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

2. Connect the profile
Insert the profile into the coupling as shown in the figure on the left.

3. Fasten the connection
Tighten the profile bolts.

4. Connect the grounding
Insert the grounding ball, compression spring and plastic plug into the slots provided.

5. Set the rotation range
Don't forget to install the module's plastic covers.
Note: The plastic plug and set screw should be in the same hole. Don't forget to install the module's plastic covers.
- M5 × 20

6. Fasten the connection
Connect profile coupling housing and pivot bearing unit and fasten the connection evenly with eight M6 × 12 screws with threadlocker.
- M6 × 12

7. Inspect the assembly
Check whether the assembly is as shown in the figure.
- M6 × 12

8. Prepare the components
Combine the assembled top with the bottom.
- M6 × 25
- M6 × 20

9. Set the rotation range
Attention: You can limit the clockwise and counterclockwise rotation of the module with M6 × 10 screws.
Attention: You can limit the clockwise and counterclockwise rotation of the module with M6 × 10 screws. There are eight equally spaced holes on the module. Optionally you can set the rotation limits with two screws.
- M6 × 10

10. Connect the grounding
Caution: Make the ground connection and check that it is secure.
Caution: Make the ground connection and check that it is secure.
- M4 × 8

11. Fit the cover
Position the covers and secure them with the screws shown.

12. Insert the gasket
Remove the yellow tape. Insert the seal to the mounting surface with the adhesive surface to the component into the seal holder shown without folds.

13. Fit the cover
The M8 mounting screws are not included.
Place the black screw caps on the heads of the M8 screws. The M8 mounting screws are not included.
- M8

14. Prepare the mounting holes
Prepare the mounting holes using this article's drawing: 86 × 72 mm hole centre spacing. Mounting template Ø 8.5 / M8; opening dimension from drawing 50 × 60 mm. This does not confirm free passage of a rigid connector through the complete coupling. All dimensions in millimetres.
Select a step or use the arrows. On mobile, swipe left or right.
Products in this series
Rotatable Panel Adaptor Vertical
Warning Lamp Cover (M18)
90° Angle Piece
Warning Lamp Cover (M22)
Wall-Socket Mounting Bracket
Rotatable Intermediate Hinge
Rotatable Wall-Mounted Hinge Horizontal Outlet
Rotatable Top Mounted 90° Angle Joint
Rotatable Panel 90° Angle Coupling
Rotatable Top Mounted Vertical Outlet
050 Support Profile - 1000mm · X-S
