Skip to content

JOINT PARTS

Wall-Socket Mounting Bracket

Request a quote
The fixed wall mounting connects a support-arm profile in the X-S system to a vertical or horizontal mounting surface. It forms a rigid attachment point and has no rotary function. The component sits between the mounting structure and profile. It is suited to assemblies where this connection is to remain fixed and the operator enclosure is positioned using other joints in the support arm.
Weight
1000 g
Material
Aluminum
Colour
RAL 7035 / Cover RAL 7016
Package Dimensions
140 × 30 × 65 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Aluminum
Colour
RAL 7035 / Cover RAL 7016
RAL colours
RAL 7035 / RAL 7016

Application & function

Operating Weight
1000 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
Fixed

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Movement type
fest

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-S-WBF01

    Weight (g)
    1000

Product documents

Product files and documentation together in one place.

Data sheets with the new article numbers are not yet available. Please request the documents you need.

Files: 7 of 7

Search filenames
ZIP 1 file
PDF 6 files
  • X-S-WBF01-Product-documents-de-DE.pdf

    2.3 MB

  • X-S-WBF01-Connection-dimensions-de-DE.pdf

    1.3 MB

  • X-S-WBF01-Product-documents-en-GB.pdf

    2.3 MB

  • X-S-WBF01-Connection-dimensions-en-GB.pdf

    1.3 MB

  • X-S-WBF01-Connection-card-de-DE.pdf

    1.1 MB

  • X-S-WBF01-Connection-card-en-GB.pdf

    1.1 MB

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 6 · Insert the gasket

  1. Insert the gasket

    1. Insert the gasket

    Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

  2. Connect the profile

    2. Connect the profile

    Insert the profile into the coupling as shown in the figure on the left.

  3. Connect the grounding

    3. Connect the grounding

    Tighten the profile bolts. Then establish the ground connection and check that it is secure.

  4. Insert the gasket

    4. Insert the gasket

    Remove the yellow tape. Insert the seal to the mounting surface with the adhesive surface to the component into the seal holder shown without folds.

  5. Fit the cover

    5. Fit the cover

    The M8 mounting screws are not included. Don't forget to install the module's plastic covers.

    Place the black screw caps on the heads of the M8 screws. The M8 mounting screws are not included. Don't forget to install the module's plastic covers.

    • M8
  6. Prepare the mounting holes

    6. Prepare the mounting holes

    Prepare the mounting holes using this article's drawing: 30 × 97.2 mm hole centre spacing. Mounting template Ø 8.5 / M8; opening dimension from drawing 35 × 55 mm. This does not confirm free passage of a rigid connector through the complete coupling. All dimensions in millimetres.

Select a step or use the arrows. On mobile, swipe left or right.