
JOINT PARTS
Rotatable Panel Adaptor Vertical
- Weight
- 720 g
- Material
- Aluminum
- Colour
- RAL 7035
- Package Dimensions
- 135 × 70 × 110 mm
- HS Code
- 7606.99.90.19
- Warranty
- 5 years
Technical data
Specifications for planning, selection and use at a glance.
Material & finish
- Material Composition
- Aluminum
- Colour
- RAL 7035
- RAL colours
- RAL 7035
Application & function
- Operating Weight
- 720 g
- Primary Use Case
- Machine Building / Automation / HMI operator stations
- Operating Temperature
- –40°C to +70°C
- Protection Rating
- –IP65 (DIN EN 60529)
- Rated Voltage
- Mechanical (not subject to electrical certification)
- Movement
- Rotatable 315°
- Rotation angle
- 315 deg
Safety & compliance
- Earthing
- Yes, integrated solution
- RoHS Compliance
- RoHS EU Directive 2011/65/EU
- REACH Compliance
- REACH Regulation 1907/2006/EC
- Certification
- IEC 60529; (EG) No. 765/2008; (EU) 2023/956
Further information
- Adapter surface
- 118 × 65 mm
Version & enquiry
Use the item number and version to prepare your enquiry.
| Choose a version | ||
|---|---|---|
| SKU: X-S-PAD01 | 720 |
SKU: X-S-PAD01
- Weight (g)
- 720
Assembly instructions
About these instructions
Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.
Preparation & tools
Supplied and installation parts

Required tools
- Allen key suitable for the fasteners
- Torque wrench for the final engineering check

1. Align the system
Insert the switching lever into the slot. The switching lever is used to adjust the torsional rigidity of the module.
- M5 × 16

2. Insert the gasket
Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

3. Connect the profile
Insert the profile into the coupling as shown in the figure on the left.

4. Fasten the connection
Tighten the profile bolts.
- M6 × 30
- J6.4

5. Insert the gasket
Remove the yellow tape. Insert the seal to the mounting surface with the adhesive surface to the component into the seal holder shown without folds.

6. Fasten the module to the panel
Mount the module on the panel.

7. Inspect the assembly
Check whether the assembly is as shown in the figure.

8. Fasten the module to the panel
The mounting screws are not included.
Attach the module to the panel with four M6 × 30 screws. The mounting screws are not included.
- M6 × 30

9. Fasten the module to the panel
Check the connection of the module to the panel to ensure proper installation.

10. Prepare the mounting holes
If required, prepare the mounting holes according to the dimensioned drawing. All dimensions are given in millimetres.
Select a step or use the arrows. On mobile, swipe left or right.
Products in this series
Warning Lamp Cover (M18)
90° Angle Piece
Warning Lamp Cover (M22)
Wall-Socket Mounting Bracket
Rotatable Intermediate Hinge
Rotatable Wall-Mounted Hinge Horizontal Outlet
Rotatable Top Mounted 90° Angle Joint
Rotatable Panel 90° Angle Coupling
Rotatable Top Mounted Vertical Outlet
Rotatable Wall-Mounted Hinge Vertical Outlet
050 Support Profile - 1000mm · X-S
