Skip to content

JOINT PARTS

Warning Lamp Cover (M22)

Request a quote
The signal light cover adds a mounting point for a light with a M22 connection to the X-S support-arm system. Fitted in the corner module area, it provides the mechanical transition to the signal light. The connection is designed for the specified thread. The cover allows a light with this connection to be incorporated into the support-arm assembly; the light's electrical configuration must be considered separately. The CAD model contains the cover body only. The gasket and two screws listed in the reference drawing are not included in the STEP model.
Weight
130 g
Material
Aluminum
Colour
RAL 7016
Package Dimensions
150 × 160 × 140 mm
HS Code
7606.99.90.19
Warranty
5 years

Technical data

Specifications for planning, selection and use at a glance.

Material & finish

Material Composition
Aluminum
Colour
RAL 7016
RAL colours
RAL 7016

Application & function

Operating Weight
130 g
Primary Use Case
Machine Building / Automation / HMI operator stations
Operating Temperature
–40°C to +70°C
Protection Rating
–IP65 (DIN EN 60529)
Rated Voltage
Mechanical (not subject to electrical certification)
Movement
Fixed

Safety & compliance

Earthing
Yes, integrated solution
RoHS Compliance
RoHS EU Directive 2011/65/EU
REACH Compliance
REACH Regulation 1907/2006/EC
Certification
IEC 60529; (EG) No. 765/2008; (EU) 2023/956

Further information

Movement type
fest
Connection thread
M22×1.5

Version & enquiry

Use the item number and version to prepare your enquiry.

  • SKU: X-S-SLA01

    Weight (g)
    130

Product documents

Product files and documentation together in one place.

4 files

PDF 3 files
  • X-S-SLA01-Produktunterlagen-DE.pdf

    718.9 kB

  • X-S-SLA01-Produktunterlagen-EN.pdf

    714.4 kB

  • X-S-SLA01-Referenzzeichnung.pdf

    71.8 kB

ZIP 1 file

Assembly instructions

About these instructions

Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.

Preparation & tools

Supplied and installation parts

Supplied and installation parts

Required tools

  • Allen key suitable for the fasteners
  • Torque wrench for the final engineering check

Step 1 / 4 · Install the warning lamp

  1. Install the warning lamp

    1. Install the warning lamp

    Remove the yellow tape and insert the gasket with the adhesive surface facing inward. The warning light connection is standard M22 × 1.5; Different connection sizes are possible on request.

    • M22 × 1,5
  2. Fit the cover

    2. Fit the cover

    Position the covers and secure them with the screws shown.

  3. Install the warning lamp

    3. Install the warning lamp

    Install the warning light by screwing it clockwise into the cover.

  4. Inspect the assembly

    4. Inspect the assembly

    Check whether the assembly is as shown in the figure.

Select a step or use the arrows. On mobile, swipe left or right.