
JOINT PARTS
Rotatable Top Mounted Vertical Outlet
- Weight
- 1565 g
- Material
- Aluminum
- Colour
- RAL 7035 / Cover RAL 7016
- Package Dimensions
- 145 × 85 × 130 mm
- HS Code
- 7606.99.90.19
- Warranty
- 5 years
Technical data
Specifications for planning, selection and use at a glance.
Material & finish
- Material Composition
- Aluminum
- Colour
- RAL 7035 / Cover RAL 7016
- RAL colours
- RAL 7035 / RAL 7016
Application & function
- Operating Weight
- 1565 g
- Primary Use Case
- Machine Building / Automation / HMI operator stations
- Operating Temperature
- –40°C to +70°C
- Protection Rating
- –IP65 (DIN EN 60529)
- Rated Voltage
- Mechanical (not subject to electrical certification)
- Movement
- Rotatable 315°
- Rotation angle
- 315 deg
Safety & compliance
- Earthing
- Yes, integrated solution
- RoHS Compliance
- RoHS EU Directive 2011/65/EU
- REACH Compliance
- REACH Regulation 1907/2006/EC
- Certification
- IEC 60529; (EG) No. 765/2008; (EU) 2023/956
Version & enquiry
Use the item number and version to prepare your enquiry.
| Choose a version | ||
|---|---|---|
| SKU: X-S-AGV01 | 1565 |
SKU: X-S-AGV01
- Weight (g)
- 1565
Product documents
Product files and documentation together in one place.
Data sheets with the new article numbers are not yet available. Please request the documents you need.
Files: 7 of 7
ZIP 1 file
- Download
X-S-AGV01-CAD.zip
646.2 kB
PDF 6 files
- Download
X-S-AGV01-Product-documents-de-DE.pdf
3.5 MB
- Download
X-S-AGV01-Connection-dimensions-de-DE.pdf
1.3 MB
- Download
X-S-AGV01-Product-documents-en-GB.pdf
3.5 MB
- Download
X-S-AGV01-Connection-dimensions-en-GB.pdf
1.3 MB
- Download
X-S-AGV01-Connection-card-de-DE.pdf
1.1 MB
- Download
X-S-AGV01-Connection-card-en-GB.pdf
1.1 MB
Assembly instructions
About these instructions
Assembly sequence prepared from the exact XINDUX article data sheet. Tightening torques not specified in the source document are deliberately not added.
Preparation & tools
Supplied and installation parts

Required tools
- Allen key suitable for the fasteners
- Torque wrench for the final engineering check

1. Insert the gasket
Remove the yellow tape. Insert the profile-side connection seal with the adhesive surface to the component into the seal holder shown without folds.

2. Connect the profile
Insert the support arm profile into the profile-side connection of the rotatable top mounting module until it rests.

3. Fasten the connection
Fasten the support arm profile evenly with four M6 × 30 profile bolts and four J6.4 lock washers.
- M6 × 30
- J6.4

4. Connect the grounding
Insert a Ø5 mm grounding ball, a Ø5 × 13 mm compression spring and a Ø6 × 8 mm plastic plug into the profile connection receptacles shown.

5. Set the rotation range
Screw an M5 × 20 set screw into the radial threaded hole shown on the support arm profile. Align the set screw with the previously inserted plastic plug.
- M5 × 20

6. Set the rotation range
Set the desired rotation range using the eight evenly spaced stop holes. Use one M6 × 10 rotation limit screw for each desired stop. A screw is included in the scope of delivery shown; a second one is required for two stops.
- M6 × 10

7. Fasten the connection
Connect the profile coupling housing to the pivot bearing unit and fasten the connection evenly with eight M6 × 12 screws with threadlocker.
- M6 × 12

8. Inspect the assembly
Check whether the profile coupling housing and pivot bearing unit are assembled flush and all eight connecting screws are fully seated.

9. Prepare the components
Insert the pre-assembled profile coupling and pivot bearing unit completely into the top assembly base body.

10. Fasten the connection
Attach the pivot bearing assembly evenly to the top mount base body with seven M6 × 25 screws and one M6 × 20 screw.
- M6 × 25
- M6 × 20

11. Connect the grounding
Attach the protective conductor to the marked ground connection on the bottom with an M4 × 8 screw and check that it is secure.
- M4 × 8

12. Insert the gasket
Remove the yellow tape. Insert the seal to the mounting surface with the adhesive surface to the component into the seal holder shown without folds.

13. Fit the cover
The mounting screws are not included.
Place four black caps on the heads of the four M8 mounting screws. The mounting screws are not included.
- M8

14. Prepare the mounting holes
Prepare the mounting holes using this article's drawing: 90 × 90 mm hole centre spacing. Mounting template Ø 8.5 / M8; opening dimension from drawing Ø 40 mm. This does not confirm free passage of a rigid connector through the complete coupling. All dimensions in millimetres.
Select a step or use the arrows. On mobile, swipe left or right.
Products in this series
Rotatable Panel Adaptor Vertical
Warning Lamp Cover (M18)
90° Angle Piece
Warning Lamp Cover (M22)
Wall-Socket Mounting Bracket
Rotatable Intermediate Hinge
Rotatable Wall-Mounted Hinge Horizontal Outlet
Rotatable Top Mounted 90° Angle Joint
Rotatable Panel 90° Angle Coupling
Rotatable Wall-Mounted Hinge Vertical Outlet
050 Support Profile - 1000mm · X-S
