Question 1

What are the defining differences between the single, double, and triple pedal ranges?

Accepted Answer

The platform is identical; only the number of independent foot actuators changes, 1 command for the Single, 2 for the Double, and 3 for the Triple pedal, with housings sized 155 × 150 × 265 mm, 275 × 150 × 250 mm, and 407 × 150 × 250 mm respectively.

Question 2

How should I quote the item codes and color variants?

Accepted Answer

Always state the series prefix plus the color, e.g., XX-PDL1140 (Black), XX-PDL1120 (Yellow), XX-PDL1110 (Red).

Question 3

In which operating environments do the pedals perform reliably?

Accepted Answer

Engineered for machine building, automation, and operator-station environments, the pedals withstand −40 °C to +80 °C while the protective shroud guards against impact, dust, and splashing.

Question 4

Which mechanical and electrical baseline values can I use for engineering checks?

Accepted Answer

Mechanical endurance 20 million cycles, maximum actuation frequency 3,600 operations/hour; Ith 10 A, Uimp 6 kV, and nominal voltages up to 400 VAC/4 A depending on contact configuration.

Question 5

Which protections and certifications back up the datasheet values?

Accepted Answer

Contact block protection is IP20/IP40; certifications include IMQ CA02.06217, UL/cULus E131787, CCC 2024010305656752, EAC RU D-IT.PA07.B.37848/24, plus EU and UKCA Declarations of Conformity.

Question 6

Which standards are worth citing in tender documents?

Accepted Answer

Quote EN 60947-1, EN 60947-5-1, EN ISO 14119,

Question 7

How is the wiring/contact flexibility handled for safety circuits?

Accepted Answer

The base platform accepts standard contact blocks and allows you to match the contact rating (400 VAC/4A) to the expected load while keeping the same pedal housing.

Question 8

What does the protective shroud contribute to installation planning?

Accepted Answer

The aluminum shroud keeps the operator safe from stray hits and prevents debris ingress, so you can specify it for machine-room operator stations without additional guards.

Question 9

How should the application note influence quoting?

Accepted Answer

The datasheet clarifies that the listed values apply at the series level; only offer variant-specific tests when the customer requests a bespoke configuration.

Question 10

How do the pedals contribute to lifecycle messaging?

Accepted Answer

Emphasize the 20 million-cycle rating and the low-maintenance aluminum construction to reinforce the long service life and reduced TCO.

Question 11

What environmental conditions still require validation?

Accepted Answer

While the pedals cover broad industrial conditions, confirm ambient humidity/dust levels before specifying if a higher IP rating, seals, or custom guards are needed beyond the standard IP20/40 contact setup.

Question 12

Can the same datasheet be used across markets?

Accepted Answer

Yes, each pdf covers EN, UL/cULus, CCC, EAC and UKCA requirements, so you can circulate it in Europe, the UK and approval-driven export markets without preparing custom versions.

Question 13

Are there guidelines for specifying the pedals in machine safety concepts?

Accepted Answer

Pair the pedal with safety-rated contact blocks, positive-opening contacts, and a defined mounting plate; document the pedal series code plus the load path in the machine safety folder.

Question 14

What makes the XX-PDL series stand out in operator-station control?

Accepted Answer

Robust aluminum housing, identical ergonomics for single/double/triple options, and direct compatibility with existing operator stations make these pedals easy to integrate and standardize across production lines.

Triple Foot Switches

Additional Information

Frequently Asked Questions